-
-
Registered Member
Re:Building your own Plywood tank......
I like working with pboard also. Are you talking like the fibreboard or melamine or MDF?
Is the pboard totally sealed from water? From my experience with pboard, it reallys swells up when water gets on it.
Just curious!
-
Re:Building your own Plywood tank......
Ron
I am talking about particleboard like the core of melamine is made of where you can see the flakes of wood in it.
I use mdf too, which is smoother and easier to paint on the outside, but a bit more expensive and i also find that it is not as rigid imo.
As far as sealing, Yes, i used 3 layers of epoxy resin, the first I also bedded with fiberglass cloth for strength. I think it is safe to say it will be watertight lol. You are correct in that any engineered board will swell when exposed to moisture, that is why it is imperitive seal everything and have proper ventilation.
-
Re:Building your own Plywood tank......
here is another link for a plywood tank....hope it helps!!!
http://www.marksfish.f9.co.uk/diy/plywood.htm
-
Re:Building your own Plywood tank......
Great link Tom!
This article by Jim is the first one I ever came across. Very inspirational! It's also the one that prompted me to use fiberglass tape and polyester resin on the inside plywood-to-plywood joints of the tank. And I'm glad I did! I've talked to many whose plywood-to-plywood joints in the tanks have separated due to the outward push from the water's weight. The fiberglass holds it all together tightly.
Thanks.
scott
-
Re:Building your own Plywood tank......
No problem Scott....glad it helped ...juts starting out in discus and trying to be budget minded ...I researched plywood tanks heavily....have not built one yet but really do want to try and do so......
-
Re:Building your own Plywood tank......
-
Re:Building your own Plywood tank......
I built wood 75 gallon aquarium back in 1988 and it worked quite well. I used clear epoxy paint on the outside and inside and the wood grain was very nice as a backdrop. As I recall I used epoxy glue on the joints, but no reinforcing tape. Like anything, the more care you take in preparing the wood surfaces before painting will make painting easier and result in a better product.
I sold it two years later when I moved, but it was still in use 3 years after that. Can't remember who I sold it to now.
If I made another one, I would make a large (400+ gallons) insulated tank for coldwater fish.
-
Registered Member
Re:Building your own Plywood tank......
I have 2 4x2x2 foot plywood tanks ... the tanks are leaking at the seams. I glued and screwed the plywood together, and reinforced with a strip of 3/4 inch plywood around the bottom. I then painted with Epoxy Paint. However, the weight of the water still causes a bit of separation at the seams particularly the bottom.
What can I do to seal these seams without taking apart the tanks?
Thanks
-
Re:Building your own Plywood tank......
Question what kind of plywood is best for this project?.
chris
-
Registered Member
Re:Building your own Plywood tank......
Marine grade plywood is supposed to be the best. But it is expensive. I used regular plywood with waterproof wood glue stainless steel screws and two part Epoxy paint (5 coats). Epoxy is expensive and I had lots left over that was mixed. I was told that this can be stored in the freezer for future use. The mix and brush are in my freezer for my next plywood tank.
-
Re:Building your own Plywood tank......
Thank you vrey much
chris
-
Registered Member
Re:Building your own Plywood tank......
Jeffry
Did you use waterproof glue for the joints? I used glue stainless screws, Epoxy and siliconed the joints. The tank has been in operation for about 12 months and holding fine.
-
Re: Building your own Plywood tank......
I have a question on the epoxy paint used on the plywood tank. I've been checking around and the only epoxy paint seems to be the paint they use on garage floors. Does anybody know if this is the same epoxy paint ?
-
Re: Building your own Plywood tank......
No it's not he same see my 210 gallon under DYI thread, I used the same paint as Scott. I have used the garage paint for my floor, the two paints are nothing alike aside of being 2 part epoxies. The garage paint will leach harmfull chemicals into your water, no good for fish, make sure you use an aquatic paint at very least.
Good luck, I would really follow Scott's direction to a "T" works great.
Dirk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules